Matho Models 35134 Banana boxes

 

 

DIRE À UN AMI

Disponibilité du produit

Quels sont les frais de port?

Envoyez-vous à mon pays?

Comment puis-je payer?

Produit Détails
Échelle: 1:35
Code de l'article: 35134
Fabricant: Matho Models
Ajouté le: vendredi 28 octobre 2022

Description du produit

Contains 1 A5 sized sheet with a total of 14 boxes (3 different designs). For each box a separated top part and bottom part is available. 

 

Features:

• Printed on slightly thickened paper to give you a very realistic appearance
• Inside of the boxes is printed as well with brown cardboard texture, so the boxes can be displayed opened as well
• the necessary holes are indicated in the print (see tips below)

 

Tips:

• Cut out with a really sharp (preferable new) knife and steel ruler
• To cut out the small round holes (the correct positions are indicated), simply use a scribe needle and press it down until you get a nice round hole of the correct size, then remove the excess paper on the other side with a sharp knife
  To cut the longer holes, do exactly the same with a scribe needle on the left and right end of the hole, then use a sharp knife to cut out the remaining part
• For easier bending, it is recommended that you use a knife + steel ruler to very gently move over the bending lines. Be sure NOT to press too hard as these lines should not be cut. This will result in nice and sharp bends.
• For colored boxes you can slightly paint the edges in the matching color (once you are finished with gluing the box together) to remove the white paper color

 

Note: copyright markings are not present on the actual product.