DEVISES     (Info?)
|
 
  Matho Models
Vous êtes ici: Catalogue > Accessoires > Photo-Découpe > 35078
 
 
 
Jungle Plants BJungle Plants BJungle Plants B
   
   
   

Matho Models 35078 Jungle Plants B

    2 critique(s) | Ajoutez votre critique
 
€8.95 (€7.40 ex. VAT)
ACHETER
 
À SOUHAITS
DIRE À UN AMI

Disponibilité du produit

 
Habituellement expédié sous 1 - 2 jours ouvrables.
This product is also available at our dealers.

Quels sont les frais de port?

Une vue d'ensemble des frais d'expédition peuvent être trouvés ici ici.

Envoyez-vous à mon pays?

Nous expédions dans le monde entier, alors oui, nous envoyons à votre pays!

Comment puis-je payer?

Nous acceptons le paiement via Carte de Crédit, Paypal, Virement, Bankcontact, iDeal, Sofort Banking ou Paiement comptant sur collection. Plus d'info ici.
Produit Détails
Échelle: 1:35
Code de l'article: 35078
Fabricant: Matho Models
Ajouté le: vendredi 07 septembre 2018
Description du produit

Contains 1 photo-etch sheet, etched on an ultra-thin (0,10mm) sheet of brass for realistic leave-thickness. The very fine etch-work (including leave veins) will result in some very realistic looking plants. Sheet size is 7 x 9,5 cm (2,76" x 3,74").

You can use the plants as ground cover, or as foliage on your own tree-armatures. Use a thin green metal wire to attach them. 

Base not included.

How to use and paint

  • Leave the plants in the fret while painting and weathering. 
  • First airbrush a few layers of (acrylic) primer. Let it dry for at least 24 hours between each coat. After that you can continue with your regular (acrylic or enamel) colors and weathering products. Seal with a few coats of varnish. Let the varnish dry for at least 24 hours so it is hard enough to protect your paint-work during the next steps.
  • Always be very gentle in the following steps when handling the plants to prevent the paint from scratching.
  • Place the fret on a hard (for example wood or glass) surface, and cut out the plants from the fret with a fresh knife. 
  • Use a micro file to clean up any residue of the fret. If cut well however, you will not need to use a file on straight edges.
  • Now use 2 tweezers to turn the leaves and branches into a natural position. Use 1 tweezers to hold the plants, the other to shape the leaves and branches. Don't forget to bend the leaves themselves as well for the most realistic appearance.
  • Use a tweezers (be very gentle to avoid paint scratches!) to glue them to place. 
  • Some parts will now need some extra painting to restore the damaging caused when cutting from the fret or when handling afterwards. Use a round brush with very fine tip with your main color to touch up the parts where you can still see the PE brass color shining through.
Produits connexes
 
AVEZ-VOUS VU NOS AUTRES PRODUITS RÉCENTS?
 

Acheter plus? Économisez plus!
Rechercher
Rechercher
En Vedette
Nous vendons aussi



Nous Acceptons



 
   
  © Copyright 2014 - 2024 Matho Models. All Rights Reserved.
Adresse: Erfgoedlaan 7 - 9800 Deinze - BELGIQUE
Tel.: +32 (0) 477 49 13 61 - E-mail: voir la page contact
website by Matho Graphics  
  Tous les prix indiqués incluent la TVA pour l'UE-clients, et sont hors TVA pour les non-UE-clients, sauf mention contraire.