Matho Models 35086 Metal Fence A - big set with gate
noch keine Bewertungen | Schreiben Sie die erste Bewertung!
ZUR WUNSCHLISTE
WEITEREMPFEHLEN
Produktverfügbarkeit
versandfertig in 1-2 Werktagen. This product is also available at our dealers.
Was sind die Versandkosten?
Eine Übersicht über die Versandkosten finden Sie hier.
Versanden Sie nach mein Land?
Wir liefern weltweit, also ja, wir versanden zu Ihrem Land!
Wie kann ich bezahlen?
Wir nehmen Zahlung über Kreditkarte, Sofort Banking, Paypal, Banküberweisung, Bankcontact, iDeal oder Barzahlung bei Abholung. Mehr Informationen hier.
Produktdetails
Maßstab: 1:35
Artikelcode: 35086
Hersteller: Matho Models
Aufgenommen am: Donnerstag, 03. Oktober 2019
Produktbeschreibung
SET DISCOUNT: YOU SAVE 20% compared to individual prices
Contains 3 highly detailed photo-etch frets with 4 fence parts and 1 two-part gate.
Set content (each one is also available separately)
click for more info on individual products
Contains only photo-etch parts. Wall sections, support columns and base are not included.
How to use and paint
-
Leave the fence in the fret while painting and weathering.
-
First airbrush a few layers of (acrylic) primer. Let it dry for at least 24 hours between each coat. After that you can continue with your regular (acrylic or enamel) colors and weathering products. Seal with a few coats of varnish. Let the varnish dry for at least 24 hours so it is hard enough to protect your paint-work during the next steps.
-
Always be very gentle in the following steps when handling the fence to prevent the paint from scratching.
-
Place the fret on a hard (for example wood or glass) surface, and cut out the fence from the fret with a fresh knife.
-
Use a micro file to clean up any residue of the fret. If cut well however, you will not need to use a file on straight edges.
-
Some parts will now need some extra painting to restore the damaging caused when cutting from the fret or when handling afterwards. Use a round brush with very fine tip with your main color to touch up the parts where you can still see the PE brass color shining through.
|